Masking cardboard is a deeply bonded, poly-coated cardboard advised accurately for customer use in repainting and refinishing automobiles. The use of this artefact ensures the accomplished affection after-effects by attention the auto from acrylic penetration, seep-through and overspray.
Newspaper, which was already broadly acclimated back painting cars accepted too absorptive for this purpose and generally resulted in acrylic bleed-through. The poly blanket in appearance cardboard offers complete aegis for the surfaces it is activated to if it is activated correctly.
Masking articles accommodate the best assimilation attrition from the acrid solvents acclimated in auto sealers, lacquers, apply paints and bright covering products. It eliminates dust contagion from fibers and performs well, alike during wet sanding. Appearance articles calmly bear assaults from the able bankrupt admirers acclimated to dry the automobiles afterwards painting
Masking cardboard charge be anxiously activated to all non-painted surfaces and anchored in abode by appearance band advised for this purpose. These articles are accessible in a array of widths to fit any job. Narrow band is best ill-fitted for applying about curves. Wide versions are added acceptable for bound accoutrement ample areas of the automobile. A array of accoutrement such as a appearance cardboard dispenser, acceleration up the job and abridge the appliance process. Appearance dispensers are accessible as hand-held accouterments or adult multi-roll dispensers.
Protected surfaces charge be absolutely dry and chargeless of silicones, lubricants, dust, blight and added apparent contaminants afore appearance cardboard and appearance band are applied. Unless arced surfaces are actuality masked the band should not be stretched. Simply lay it on the apparent to be adequate and administer band over the bend of the paper. It should overlap both the breadth to be corrective and the breadth to be taped. Then, application a sharp, single-side razor blade, cut the band forth the band breadth the two areas should be disconnected and abolish the band over the breadth to be painted.
When accoutrement trim, appearance cardboard is not required. Select a appearance band that is advanced abundant to absolutely awning the trim components. Back taping a aperture handle, for instance, administer a advanced allotment of appearance band to the high breadth of the handle first, cutting the band by duke to anticipate any ripples or ridges. Again administer a additional allotment of band to awning the lower ancillary of the handle, hardly overlapping the aboriginal piece. Administer appearance band to chrome strips, grills, weatherstripping, adorning emblems and antennas in the aforementioned manner.
When appearance bumpers, 12-inches advanced is able for the job. Protecting grills is accessible back appearance cardboard is continued able-bodied central the agent breadth to anticipate overspraying the radiator and engine. Letters and emblems can present a botheration that is calmly bound by application attenuated widths (1/4 inch) of tape, admitting back possible, it is best to abolish emblems. Headlights and taillights can additionally be calmly masked application three-to-six-inch sections.
Two layers are recommended for accoutrement windshields. Begin appearance a windshield by aboriginal applying a active breadth of appearance band about the windshield trim or the bottle itself. Attach appearance cardboard to the lower allocation of the windshield and again administer a top allotment to the windshield that overlaps the basal piece. Appearance in this way prevents baptize and bits from active bottomward over the cardboard assimilate an baldheaded area. Do not abolish it until the anew activated acrylic is dry.
Great article. Thanks for sharing
ReplyDelete